********************
* General Settings *
********************


*** Current FED settings:

       FED - Read Route              = FED9U_ROUTE_VME
       FED - DAQ Mode                = FED9U_MODE_ZERO_SUPPRESSED
       FED - Scope Length            = 5
       FED - Test Register           = NORMAL
       FED - Strip Pedestal          = 0
       FED - Strip High Threshold    = 50
       FED - Strip Low Threshold     = 50
       FED - Crate Number            = 0
       FED - Slot Number             = 16
       FED - Clock Source            = FED9U_CLOCK_TTC
       FED - Trigger Source          = FED9U_TRIG_TTC

*** Current FTE settings:

       FTE - Trigger State           = RANDOM
       FTE - L1A Period              = 400
       FTE - L1A Low Rate Period     = 40000
       FTE - L1A Random Rate         = 164
       FTE - Minimum Trigger Spacing = 3
       FTE - TCS Source              = LOCAL_SRC
       FTE - TCS Status Input Enable = ON

*** Current FTE FM settings:

       FTE FM - Cluster Definition   = MULTI_STRIP
       FTE FM - Cluster Widths File  = FTeFrameMakerFiles/FTe_CluWidthDistr_Simulation.txt
       FTE FM - Digital High Level   = 3600
       FTE FM - Digital Low Level    = 400
       FTE FM - Pedestal Level       = 1200
       FTE FM - Maximum Hit Level    = 2050
       FTE FM - Minimum Hit Level    = 1950
       FTE FM - Gaussian Noise Level = 0




######################################################################

Test 1:

  Initial settings:

    Number of triggers to send   = 150000
    Maximum readout rate (MB/s)  = 400
    Tracker occupancy percentage = 4
    Fed9UEvent error checking enabled
    System status checking enabled




Results For Test 1:

  Number of triggers sent                              = 150000
  Number of events received                            = 150000
  Time taken                                           = 1561.04
  Data rate (MB/sec)                                   = 0.254325
  Fraction of samples for which throttle was enabled   = 0

 Errors:

  Number of events with Event Number errors            = 0
  Number of events with Event Length errors            = 0
  Number of events with Fed9U CRC errors               = 0
  Number of events with Fed9UEvent construction errors = 0