********************
* General Settings *
********************


*** Current FED settings:

       FED - Read Route              = FED9U_ROUTE_SLINK64
       FED - DAQ Mode                = FED9U_MODE_ZERO_SUPPRESSED
       FED - Scope Length            = 6
       FED - Test Register           = NORMAL
       FED - Strip Pedestal          = 0
       FED - Strip High Threshold    = 50
       FED - Strip Low Threshold     = 50
       FED - Crate Number            = 0
       FED - Slot Number             = 16
       FED - Clock Source            = FED9U_CLOCK_TTC
       FED - Trigger Source          = FED9U_TRIG_TTC

*** Current FTE settings:

       FTE - Trigger State           = REPETITIVE
       FTE - L1A Period              = 4000
       FTE - L1A Low Rate Period     = 40000
       FTE - L1A Random Rate         = 164
       FTE - Minimum Trigger Spacing = 3
       FTE - TCS Source              = LOCAL_SRC
       FTE - TCS Status Input Enable = ON

*** Current FTE FM settings:

       FTE FM - Cluster Definition   = SINGLE_STRIP
       FTE FM - Cluster Widths File  = FTeFrameMakerFiles/FTe_CluWidthDistr_Simulation.txt
       FTE FM - Digital High Level   = 3600
       FTE FM - Digital Low Level    = 400
       FTE FM - Pedestal Level       = 500
       FTE FM - Maximum Hit Level    = 3500
       FTE FM - Minimum Hit Level    = 600
       FTE FM - Gaussian Noise Level = 0




################################################################################

  Initial settings:

    Number of trigger cycles to skip before each data acquisition = 10
    Maximum readout rate (MB/s)                                   = 200
    Tracker occupancy percent                                     = 1
    Number of data acquisition loops                              = 100


################################################################################

Summary:

  Number of events received = 1126400
  Number of events acquired = 102400

  Error stats:

    Whilst skipping events:

      Number of word count errors   = 0
      Number of Slink CRC errors    = 0
      Number of event number errors = 0
      Number of event length errors = 0

    Whilst acquiring events:

      Number of word count errors           = 0
      Number of Slink CRC errors            = 0
      Number of event number errors         = 0
      Number of event length errors         = 0
      Number of Fed9U CRC errors            = 0
      Number of Fed9U constructor errors    = 0
      Number of Fed9U get event data errors = 0


ADC Values results written to: OutputReportFiles/2005-07-28__15-02-05__2_FedHitCheck_AdcValuesResults.txt
Hit Strips results written to: OutputReportFiles/2005-07-28__15-02-05__3_FedHitCheck_HitStripsResults.txt